!! History Commons Alert, Exciting News
Profile: Richard Gage
Richard Gage was a participant or observer in the following events:
After the National Institute of Standards and Technology (NIST) announces the results of its investigation into the collapse of World Trade Center Building 7, some critics dispute its explanation for the collapse and question its apparent debunking of claims that explosives were used to demolish the building. The 47-story tower collapsed late in the afternoon of 9/11, even though no plane hit it (see (5:20 p.m.) September 11, 2001). Some have argued that fire and the falling debris from the Twin Towers’ collapses should not have brought down such a large steel and concrete structure. [Associated Press, 8/21/2008]
NIST Lacks 'the Expertise on Explosives' - James Quintiere, a professor of fire protection engineering at the University of Maryland who previously worked as the chief of NIST’s fire science and engineering division, says that NIST does not “have the expertise on explosives, so I don’t know how they came to that conclusion,” that explosives did not cause the collapse. However, Quintiere says he never personally believed explosives were involved. [Los Angeles Times, 8/22/2008] Richard Gage, a California architect and leader of a group called Architects and Engineers for 9/11 Truth, complains, “How much longer do we have to endure the cover-up of how Building 7 was destroyed?” The New York Times points out that “the collapse of 7 World Trade Center—home at the time to branch offices of the Central Intelligence Agency, the Secret Service, and the Giuliani administration’s emergency operations center—is cited in hundreds of Web sites and books as perhaps the most compelling evidence that an insider secretly planted explosives, intentionally destroying the tower.” [New York Times, 8/21/2008]
NIST Presentation - At a presentation of its findings earlier in the day, NIST announced that, in its three-year study of the collapse, it found no evidence showing explosives were used to bring the building down. [National Institute of Standards and Technology, 8/21/2008; National Institute of Standards and Technology, 8/21/2008] During his summary of the findings of NIST’s WTC 7 investigation (see August 21, 2008), lead investigator Shyam Sunder said, “We did not find any evidence that explosives were used to bring the building down.” [National Institute of Standards and Technology, 8/21/2008]
'No Witness Reports' of Loud Explosions - In the draft version of its final report on the collapse, which is released on this day (see August 21, 2008), NIST explains: “Blast from the smallest charge capable of failing a critical column… would have resulted in a sound level of 130 dB to 140 dB at a distance of at least half a mile if unobstructed by surrounding buildings.… This sound level is consistent with standing next to a jet plane engine and more than ten times louder than being in front of the speakers at a rock concert. There were no witness reports of such a loud noise, nor was such a noise heard on the audio tracks of video recordings of the WTC 7 collapse.” [National Institute of Standards and Technology, 8/2008, pp. 44-45 ]
NIST Rules out Thermite - Skeptics have argued that an incendiary material called thermite was used to bring down WTC 7 (see August 4, 2008), and this would not necessarily have created such a loud explosive boom. [New York Times, 8/21/2008] But in a fact sheet published on this day, NIST responds: “To apply thermite to a large steel column, approximately 0.13 lb of thermite would be needed to heat and melt each pound of steel. For a steel column that weighs approximately 1,000 lbs. per foot, at least 100 lbs. of thermite would need to be placed around the column, ignited, and remain in contact with the vertical steel surface as the thermite reaction took place. This is for one column… presumably, more than one column would have been prepared with thermite, if this approach were to be used. It is unlikely that 100 lbs. of thermite, or more, could have been carried into WTC 7 and placed around columns without being detected, either prior to Sept. 11 or during that day.” [National Institute of Standards and Technology, 8/21/2008] Sunder says that investigators therefore decided not to use their computer model to evaluate whether a thermite-fueled fire might have brought down WTC 7. Pointing to the omission, one skeptic says, “It is very difficult to find what you are not looking for.” [New York Times, 8/21/2008] In a 2006 fact sheet, NIST in fact admitted it “did not test for the residue” of explosives or thermite in the remaining structural steel from the WTC collapses (see August 30, 2006). [National Institute of Standards and Technology, 8/30/2006] And, as the New York Times notes, “Adding to the suspicion is the fact that in the rush to clean up the site, almost all of the steel remains of the tower were disposed of, leaving investigators in later years with little forensic evidence” (see Shortly After September 11, 2001 and September 12-October 2001). [New York Times, 8/21/2008]
Extensive Preparations for Demolition - NIST’s new fact sheet also points out: “For [WTC 7] to have been prepared for intentional demolition, walls and/or column enclosures and fireproofing would have to be removed and replaced without being detected. Preparing a column includes steps such as cutting sections with torches, which produces noxious and odorous fumes. Intentional demolition usually requires applying explosive charges to most, if not all, interior columns, not just one or a limited set of columns in a building.” [National Institute of Standards and Technology, 8/21/2008]
Receive weekly email updates summarizing what contributors have added to the History Commons database
Developing and maintaining this site is very labor intensive. If you find it useful, please give us a hand and donate what you can.
If you would like to help us with this effort, please contact us. We need help with programming (Java, JDO, mysql, and xml), design, networking, and publicity. If you want to contribute information to this site, click the register link at the top of the page, and start contributing.