!! History Commons Alert, Exciting News
Profile: RJ Lee Group
RJ Lee Group was a participant or observer in the following events:
An optical microscopy image of a particle in the WTC dust formed by high temperature. [Source: RJ Lee Group]A laboratory releases two reports focusing on the unique properties of the dust from the World Trade Center collapses, and finds evidence of extremely high temperatures involved in these collapses. The laboratory, RJ Lee Group of Pennsylvania, is the largest commercial electron microscope laboratory in the world. [RJ LeeGroup, Inc., 5/2004, pp. 1 ] In April 2002, it was retained on behalf of Deutsche Bank Trust Company Americas to investigate environmental contaminants in this company’s building at 130 Liberty Street, New York. [RJ LeeGroup, Inc., 12/2003, pp. 1 ] The building, located next to the World Trade Center, was heavily damaged on September 11, suffering a 24-story gash when the South Tower collapsed. [New York Times, 6/20/2003; Real Estate Weekly, 9/14/2005] RJ Lee collected samples from it, which it then analyzed “using industry standard analytical laboratory methods.” [RJ LeeGroup, Inc., 12/2003, pp. 3-4 ] In December 2003 and May 2004, it releases two reports that evaluate the features of the dust from the WTC that was deposited in 130 Liberty Street. It calls this evaluation “the most extensive microscopic investigation related to WTC dust ever performed.” [RJ LeeGroup, Inc., 12/2003, pp. 1-2 ; RJ LeeGroup, Inc., 5/2004, pp. 4 ] The reports describe phenomena that indicate extremely high temperatures were involved in the WTC collapses:
“Various metals (most notably iron and lead) were melted during the WTC event, producing spherical metallic particles. Exposure of phases to high heat results in the formation of spherical particles due to surface tension.” [RJ LeeGroup, Inc., 12/2003, pp. 17 ]
“The amount of energy introduced during the generation of the WTC dust and the ensuing conflagration caused various components to vaporize.… Many of the materials, such as lead, cadmium, mercury, and various organic compounds, vaporized and then condensed during the WTC event.” [RJ LeeGroup, Inc., 12/2003, pp. 21 ]
“An additional characteristic of WTC dust is the presence of coated particles and fibers.… The presence of lead oxide on the surface of mineral wool indicate the existence of extremely high temperatures during the collapse which caused metallic lead to volatilize, oxidize, and finally condense on the surface of the mineral wool.” [RJ LeeGroup, Inc., 5/2004, pp. 12 ]
“WTC dust markers exhibit characteristics of particles that have undergone high stress and high temperature. Asbestos in the WTC dust was reduced to thin bundles and fibrils as opposed to the complex particles found in a building having asbestos-containing surfacing materials. Gypsum in the WTC dust is finely pulverized to a degree not seen in other building debris. Mineral wool fibers have a short and fractured nature that can be attributed to the catastrophic collapse. Lead was present as ultra fine spherical particles. Some particles show evidence of being exposed to a conflagration such as spherical metals and silicates, and vesicular particles (round open porous structure having a Swiss cheese appearance as a result of boiling and evaporation).” [RJ LeeGroup, Inc., 5/2004, pp. 17-18 ]
The reports offer no explanation for the origins of the extremely high temperatures that are indicated. But physics professor Steven E. Jones (see November 8, 2005) will later claim that molten metal found in the debris of the WTC is evidence that the towers were brought down deliberately and involving the use of an incendiary substance called thermite, which can melt steel. [Deseret Morning News, 11/10/2005; Deseret Morning News, 4/10/2006]
Receive weekly email updates summarizing what contributors have added to the History Commons database
Developing and maintaining this site is very labor intensive. If you find it useful, please give us a hand and donate what you can.
If you would like to help us with this effort, please contact us. We need help with programming (Java, JDO, mysql, and xml), design, networking, and publicity. If you want to contribute information to this site, click the register link at the top of the page, and start contributing.